120 citations as recorded by crossref.

1. Statistically optimized charcoal production from Prosopis juliflora for use as alternative fuel in cement factories Z. Kiflie et al. 10.1007/s13399-020-01172-4
2. Calcium wastes as an additive for a low calcium fly ash geopolymer P. Chindaprasirt & U. Rattanasak 10.1038/s41598-023-43586-w
3. Buildings as a global carbon sink G. Churkina et al. 10.1038/s41893-019-0462-4
4. Experimental Study on the Effect of SDS and Micron Copper Particles Mixture on Carbon Dioxide Hydrates Formation Y. Li et al. 10.3390/en15186540
5. Static and dynamic mechanical behaviors of bamboo scrimber under combined tension-bending S. Guan et al. 10.1016/j.compscitech.2023.110191
6. Bibliometric trends of geopolymer research in Sub-Saharan Africa J. Matsimbe et al. 10.1016/j.mtcomm.2023.106082
7. A review on the utilization of ceramic tile waste as cement and aggregates replacement in cement based composite and a bibliometric assessment A. Tanash et al. 10.1016/j.clet.2023.100699
8. Corrosion Activity of Carbon Steel B450C and Stainless Steel SS430 Exposed to Extract Solution of a Supersulfated Cement D. Bonfil et al. 10.3390/ma15248782
9. Durability and microstructure studies on Slag-Fly Ash-Glass powder based alkali activated pavement quality concrete mixes S. Marathe et al. 10.1016/j.conbuildmat.2021.123047
10. Polymeric Composite Reinforced with PET Fiber Waste for Application in Civil Construction as a Cladding Element D. Araujo et al. 10.3390/polym14071293
11. Renewables‐based decarbonization and relocation of iron and steel making: A case study D. Gielen et al. 10.1111/jiec.12997
12. Enhancing Burnability Characteristics of Low-Temperature Burnt-Cement Clinker by Recycling Phosphogypsum Wastes U. Aksan et al. 10.1061/(ASCE)MT.1943-5533.0003786
13. Heterogeneous Surface Growth and Gelation of Cement Hydrates A. Goyal et al. 10.1021/acs.jpcc.0c02944
14. Smart modelling system for alkali-activated concrete pavements using machine learning techniques R. Fernandes et al. 10.1007/s42107-023-00635-z
15. Heat of hydration, bleeding, viscosity, setting of Ca(OH)2-GGBS and MgO-GGBS grouts H. Yu et al. 10.1016/j.conbuildmat.2020.121839
16. Global Carbon Budget 2019 P. Friedlingstein et al. 10.5194/essd-11-1783-2019
17. Dynamics of Greenhouse Gas Emissions From Cement Industries in Saudi Arabia—Challenges and Opportunities Z. Khan et al. 10.1109/ACCESS.2023.3328207
18. A study on the viability of fly ash and construction and demolition waste as geopolymerized masonry mortar and their comparative analysis S. Das & S. Shrivastava 10.1016/j.matpr.2020.02.402
19. Utilization of Rice Field Conch Shells as a partial substitution of Cement and Fine Aggregate for Split Tensile Strength of Concrete N. Permatasari et al. 10.1051/e3sconf/202447601018
20. Effect of using Austrian pine cones powder as an additive on oil well cement properties H. AL Khalaf et al. 10.1016/j.heliyon.2023.e12975
21. Modification of CO2 capture and pore structure of hardened cement paste made with nano-TiO2 addition: Influence of water-to-cement ratio and CO2 exposure age C. Moro et al. 10.1016/j.conbuildmat.2020.122131
22. Self-Heating Ability of Geopolymers Enhanced by Carbon Black Admixtures at Different Voltage Loads L. Fiala et al. 10.3390/en12214121
23. Autogenous and drying shrinkage of mortars based on Portland and calcium sulfoaluminate cements D. Sirtoli et al. 10.1617/s11527-020-01561-1
24. Sustainability benefits and commercialization challenges and strategies of geopolymer concrete: A review A. Danish et al. 10.1016/j.jobe.2022.105005
25. Influence of nanomaterials on the water absorption and chloride penetration of cement-based concrete J. Abdalla et al. 10.1016/j.matpr.2022.06.427
26. An update on bridge carbon dioxide footprint data D. Collings & S. Murthy 10.1680/jbren.23.00032
27. Thermal, moisture and mechanical properties of Seacrete: A sustainable sea-grown building material H. Johra et al. 10.1016/j.conbuildmat.2020.121025
28. Effects of Accelerated Carbonation Testing and by-Product Allocation on the CO2-Sequestration-to-Emission Ratios of Fly Ash-Based Binder Systems P. Van den Heede & N. De Belie 10.3390/app11062781
29. Properties and Cementation Mechanism of Geopolymer Backfill Paste Incorporating Diverse Industrial Solid Wastes H. Wang et al. 10.3390/ma16020480
30. Exploring the Driving Factors and Their Spatial Effects on Carbon Emissions in the Building Sector J. Wei et al. 10.3390/en16073094
31. Modeling of the Thermal Efficiency of a Whole Cement Clinker Calcination System and Its Application on a 5000 MT/D Production Line Y. Yao et al. 10.3390/en13205257
32. Extended exergy accounting for a typical cement industry in China D. Song et al. 10.1016/j.energy.2019.03.006
33. Mechanical behavior and microstructure mechanism of artificially stabilized marine sediment under high water content G. Cai et al. 10.1016/j.conbuildmat.2024.135484
34. Advances in Understanding the Alkali-Activated Metallurgical Slag K. Liu et al. 10.1155/2021/8795588
35. Examples of carbon dioxide emissions data in the circular economy: highway transport D. Collings 10.1680/jcien.22.00178
36. A highlight on the application of industrial and agro wastes in cement-based materials S. Adjei & S. Elkatatny 10.1016/j.petrol.2020.107911
37. Correlation between Composition and Mechanical Properties of Calcium Silicate Hydrates Identified by Infrared Spectroscopy and Density Functional Theory M. Izadifar et al. 10.1021/acs.jpcc.8b11920
38. Fabrication and Mechanical Evaluation of Eco-Friendly Geopolymeric Mortars Derived from Ignimbrite and Demolition Waste from the Construction Industry in Peru F. Huamán-Mamani et al. 10.3390/geosciences14030080
39. Regulation of mineral formation of iron-rich calcium sulfoaluminate clinker by controlling SO3 and Fe2O3 contents Y. Yao et al. 10.1016/j.cemconres.2024.107497
40. Deep insight into mechanical behavior and microstructure mechanism of quicklime-activated ground granulated blast-furnace slag pastes G. Cai et al. 10.1016/j.cemconcomp.2022.104767
41. Investigating the optimal combination for gravel and granite in blended palm oil fuel ash concrete S. Odeyemi et al. 10.1007/s41062-022-00950-5
42. Geopolymer Concrete with Lightweight Artificial Aggregates K. Kalinowska-Wichrowska et al. 10.3390/ma15093012
43. Predicting material properties of concrete from ground-penetrating radar attributes I. Morris et al. 10.1177/1475921720976999
44. Utilization of ground granulated blast-furnace slag and electrolytic manganese residue as a low-carbon cementitious material C. Tu et al. 10.1080/21650373.2023.2281628
45. Properties and microstructure of blended cement containing activated iron tailings powder B. Liu et al. 10.1680/jadcr.22.00113
46. Accelerated carbonation of biochar reinforced cement-fly ash composites: Enhancing and sequestering CO2 in building materials S. Praneeth et al. 10.1016/j.conbuildmat.2020.118363
47. Synthesis, Stability and Microstructure of a One-Step Mixed Geopolymer Backfill Paste Derived from Diverse Waste Slags X. Zhao et al. 10.3390/su15086708
48. Design and properties of 100% waste-based ternary alkali-activated mortars: Blast furnace slag, olive-stone biomass ash and rice husk ash A. Font et al. 10.1016/j.jclepro.2019.118568
49. Emergy analysis of a typical New Suspension Preheaters cement plant in China D. Song et al. 10.1016/j.jclepro.2019.03.041
50. Recycled Waste Powders for Alkali-Activated Paving Blocks for Urban Pavements: A Full Laboratory Characterization P. Tataranni 10.3390/infrastructures4040073
51. Mechanical Properties and Microstructure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl Alcohol Fiber H. Zhang et al. 10.3390/buildings14020449
52. Global CO<sub>2</sub> emissions from cement production, 1928–2018 R. Andrew 10.5194/essd-11-1675-2019
53. Theoretical principles and application to measure the flux of carbon dioxide in the air of urban zones R. Di Martino & S. Gurrieri 10.1016/j.atmosenv.2022.119302
54. Mechanism study of effect of superplasticizers on the fluidity of alkali-activated materials Z. Fan et al. 10.1617/s11527-023-02120-0
55. Application of machine learning techniques in the prediction of excess lifetime cancer risks of agricultural byproducts used as building and construction materials S. Oyebisi & H. Owamah 10.1016/j.clwas.2023.100088
56. A review on developments of environmentally friendly geopolymer technology R. Krishna et al. 10.1016/j.mtla.2021.101212
57. Characterization of an aged alkali-activated slag roof tile after 30 years of exposure to Northern Scandinavian weather T. Luukkonen et al. 10.1039/D2RA04456K
58. Chemical stabilization of demolition wastes in pavement bases using one–part fly ash and slag based geopolymers T. Doan et al. 10.1016/j.trgeo.2024.101192
59. The cost of CO2 transport by truck and rail in the United States C. Myers et al. 10.1016/j.ijggc.2024.104123
60. A critical review of microbially induced carbonate precipitation for soil stabilization: The global experiences and future prospective S. EZZAT 10.1016/j.pedsph.2023.01.011
61. Comparative Study of the Reactivity and Performance of Different Nontraditional and Natural Pozzolans in Cementitious System R. Tokpatayeva et al. 10.1520/ACEM20220021
62. 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications A. Jipa & B. Dillenburger 10.1089/3dp.2021.0024
63. Microstructural Analysis of the Reactivity Parameters of Calcined Clays C. Ramadji et al. 10.3390/su14042308
64. Embodied energy and CO2 emissions of life cycle assessment (LCA) in the traditional and contemporary Iranian construction systems A. Pakdel et al. 10.1016/j.jobe.2021.102310
65. Development of low-carbon masonry grout mixtures using alkali-activated binder A. Adesina & S. Das 10.1680/jmacr.20.00170
66. Biomass Bottom Ash as Supplementary Cementitious Material: The Effect of Mechanochemical Pre-Treatment and Mineral Carbonation L. Skevi et al. 10.3390/ma15238357
67. Mechanical, Rheological, and Microstructural Study of Ternary Alkali-Activated Pastes Using BOF Slag, Metakaolin, and Glass Powder as Precursors I. Carvalho et al. 10.1061/JMCEE7.MTENG-17132
68. Modeling the water absorption and compressive strength of geopolymer paving block: An empirical approach J. Jonbi & M. Fulazzaky 10.1016/j.measurement.2020.107695
69. Enhancement of pozzolanic activity of calcined clays by limestone powder addition G. Argın & B. Uzal 10.1016/j.conbuildmat.2021.122789
70. Influence of Interparticle Separation Distance on the Fresh and Hardened Behavior of Ecoefficient Cement Pastes A. Bergmann et al. 10.1061/JMCEE7.MTENG-14988
71. A review on alternative binders, admixtures and water for the production of sustainable concrete M. Collivignarelli et al. 10.1016/j.jclepro.2021.126408
72. The role of low carbon and high carbon materials in carbon neutrality science and carbon economics A. Grainger & G. Smith 10.1016/j.cosust.2021.06.006
73. Optimization of Eco-friendly Pavement Concrete Mixture Using Response Surface Methodology J. Al-Fahdawi & Q. Banyhussan 10.1088/1757-899X/881/1/012179
74. Damping and sound absorption properties of polymer matrix composites: A review M. Shaid Sujon et al. 10.1016/j.polymertesting.2021.107388
75. Evaluation of Mechanical Properties with the Use of EPS Polymer for the Preparation of Sustainable Composite Based on Concrete D. dos Santos 10.4028/p-gr00Jv
76. Natural radioactivity of barite concrete shields containing commonly used supplementary materials H. Gökçe et al. 10.1016/j.conbuildmat.2019.117569
77. The Effect of Curing Conditions on Selected Properties of Recycled Aggregate Concrete A. Grabiec et al. 10.3390/app10134441
78. Prediction the Strength of Fibered Reinforced Concrete Pavement Using Response Surface Methodology: Parametric Study M. Abdulridha et al. 10.1088/1757-899X/881/1/012180
79. Supersulfated cements based on pumice with quicklime, anhydrite and hemihydrate: Characterization and environmental impact K. Cabrera-Luna et al. 10.1016/j.cemconcomp.2021.104236
80. Effect of graphene oxide on high-strength concrete induced with rice husk ash: mechanical and durability performance T. Shanmuga Priya et al. 10.1007/s41062-020-00378-9
81. Effect of wet milling activation on mechanical properties and hydration process of cement composites with blast furnace slag Q. Zhang et al. 10.1016/j.conbuildmat.2024.136298
82. Development of gravitational search algorithm model for predicting packing density of cementitious pastes Q. Banyhussan et al. 10.1016/j.jobe.2019.100946
83. Life cycle assessment of sewage sludge treatment and disposal based on nutrient and energy recovery: A review A. Ding et al. 10.1016/j.scitotenv.2020.144451
84. CO2 curing of mortar with natural and recycled concrete aggregate: An environmental and economic assessment C. Moro et al. 10.1016/j.conbuildmat.2023.132587
85. Quantification and micro-mechanisms of CO2 sequestration in magnesia-lime-fly ash/slag solidified soils D. Wang et al. 10.1016/j.ijggc.2019.102827
86. Brandschutz in der Gebäudetechnik für den produktiven Holzbau H. Artmann & A. Waldner 10.1002/bate.202000034
87. Active Low-Silicon Iron Tailings Powder Production from Discarded Tailings for Supplementary Cementitious Material B. Liu et al. 10.2139/ssrn.4166099
88. Methods for Evaluating Pozzolanic Reactivity in Calcined Clays: A Review V. Pinheiro et al. 10.3390/ma16134778
89. TiO2 nanoparticles influence on the environmental performance of natural and recycled mortars: A life cycle assessment C. Moro et al. 10.1016/j.eiar.2020.106430
90. Orthogonal experimental and theoretical study on mechanical properties of fiber-reinforced recycled powder concrete S. Song et al. 10.1016/j.cscm.2022.e01546
91. Physical and mechanical properties of cement containing regional hazelnut shell ash wastes Y. Baran et al. 10.1016/j.jclepro.2020.120965
92. Basic creep of limestone–calcined clay cements: An experimental and numerical approach J. Ston & K. Scrivener 10.1016/j.tafmec.2019.102270
93. Global CO2 Emission-Related Geotechnical Engineering Hazards and the Mission for Sustainable Geotechnical Engineering . Chang et al. 10.3390/en12132567
94. Impact of nano-TiO2 addition on the reduction of net CO2 emissions of cement pastes after CO2 curing C. Moro et al. 10.1016/j.cemconcomp.2021.104160
95. Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers Z. Li et al. 10.1016/j.conbuildmat.2020.120985
96. Comparative Analysis of Multi-Criteria Decision Making and Life Cycle Assessment Methods for Sustainable Evaluation of Concrete Mixtures C. Moro 10.3390/su151712746
97. Geopolymers in construction - recent developments M. Nawaz et al. 10.1016/j.conbuildmat.2020.120472
98. Shower cooler reduces pollutants release in production of competitive cement substitute at low cost J. Maroušek et al. 10.1080/15567036.2020.1825560
99. The influence of pretensioning on the load-bearing behaviour of concrete beams reinforced with carbon fibre reinforced polymers M. Hammerl & B. Kromoser 10.1016/j.compstruct.2021.114265
100. Solidification/stabilization of gold mine tailings using calcium sulfoaluminate-belite cement J. Kiventerä et al. 10.1016/j.jclepro.2019.118008
101. Coloured concrete produced from low-carbon cements: Mechanical properties, chromatic stability and sustainability C. Jesus et al. 10.1016/j.jobe.2023.106018
102. Performance of lime-metakaolin pastes using gravel wash mud (GWM) V. Thapa & D. Waldmann 10.1016/j.cemconcomp.2020.103772
103. Global CO<sub>2</sub> uptake by cement from 1930 to 2019 R. Guo et al. 10.5194/essd-13-1791-2021
104. Hydration and properties of hydrogen-based mineral phase transformation iron ore tailings as supplementary cementitious material Z. Tang et al. 10.1016/j.jenvman.2024.120594
105. Hydration evolution of calcium sulfoaluminate cement modified with styrene-butadiene copolymer: Effect of various temperatures and relative humidity S. Zhang et al. 10.1016/j.cemconcomp.2023.105107
106. Characterisation of Industrial Side Streams and Their Application for the Production of Geopolymer Composites M. Küçük et al. 10.3390/min11060593
107. MEIC-global-CO2: A new global CO2 emission inventory with highly-resolved source category and sub-country information R. Xu et al. 10.1007/s11430-023-1230-3
108. Effect of Coral Aggregates of Blended Cement Concrete Subjected to Different Water Immersion Condition B. Bunyamin et al. 10.1155/2022/2919167
109. The impact of CO2 uptake rate on the environmental performance of cementitious composites: A new dynamic Global Warming Potential analysis C. Moro et al. 10.1016/j.jclepro.2022.134155
110. Evaluation of the Mechanical Performance of Concrete Reinforced with PET Fibers: A Sustainable Approach D. dos Santos & A. Moraes Martuchelli 10.4028/p-aa9PxO
111. Comparative life cycle assessment (LCA) of geopolymer cement manufacturing with Portland cement in Indian context R. Meshram & S. Kumar 10.1007/s13762-021-03336-9
112. Use of Sugarcane Bagasse ash to Manufacture Light Weight Sustainable and Economical Concrete . Alka A. Avasthi et al. 10.48175/IJARSCT-2496
113. Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete S. Haruna et al. 10.1016/j.conbuildmat.2020.120024
114. Feasibility of recycling waste carbon black in cement mortar production: Environmental life cycle assessment and performance evaluation M. Irshidat et al. 10.1016/j.conbuildmat.2021.123740
115. Engineering performance and microstructure characteristics of natural marine sediment stabilized with quicklime-activated GGBS under different lime proportions G. Cai et al. 10.1080/1064119X.2022.2105765
116. A striking growth of CO2 emissions from the global cement industry driven by new facilities in emerging countries C. Chen et al. 10.1088/1748-9326/ac48b5
117. Development and evaluation of a novel geopolymer based on basalt rock waste and ground granulated blast furnace slag M. Nawaz et al. 10.1080/14488353.2021.1995132
118. Behavior of geopolymeric recycled aggregate concrete-filled FRP tube (GRACFFT) columns under lateral cyclic loading J. Cai et al. 10.1016/j.engstruct.2020.111047
119. Interfacial evaluation of geopolymer mortar prepared with recycled geopolymer fine aggregates P. Zhu et al. 10.1016/j.conbuildmat.2020.119849
120. One-part alkali-activated slag binder for cemented fine tailings backfill: proportion optimization and properties evaluation G. Zhu et al. 10.1007/s11356-022-20331-w